Protect Parts Integrity
Cryogenic Tumble Deburring does not affect the surface finish or geometry of the part. This deburring method provides a cost-effective, safe and clean alternative to traditional hand, vibratory or tumbling methods.
Parts are placed in a chamber, cooled and then tumbled against one another to remove external burrs on your parts. The machine burrs are frozen and removed quickly and cleanly by the passing of other parts. Little to no dust or residue remains. Only offensive burrs are removed. Edges are maintained without rounding or other material removal.
Use On Many Materials
Cryogenic Tumbling works on plastics, polymers, nylons, delrin, Teflon, polypropylene, polycarbonate, ABS, PET, HDPE, PEEK, DAP, Tefzel, PPS, Viton, Torlon, CTFE, Liquid Crystal Polymer, PH Stainless Steels and Beryllium Copper.
This process generates repeatable and reliable results. Many medical devices and other high value precision components are included in NitroFreeze’s vast array of successful tumble deburring applications.
Economical & High Quality
Cryogenic Tumble Deburring is far more cost-effective than hand deburring by a significant margin – and it yields superior quality. Our tumbling process produces consistent part-to-part results, unlike variations produced by individual operators attempting to hand deburr.
The cost to deburr parts can range from less than .01 cent to several dollars per piece. A general rule of thumb: the cost is between 10% and 20% of the value of the part, although each part must be considered on its individual characteristics.
The standard turnaround time for delivery of Cryogenic Tumbling is two days after receipt. NitroFreeze offers same day and one-day service for a small premium.
Nitrofreeze supports prototype shops that are working with small quantities as well as high volume production quantities.
Send Us Your Samples
Nitrofreeze is pleased to provide a no-cost and no obligation assessment of your machine burr problem.
We can review part drawings, photos and actual samples of machined parts.If the parts are deemed a good candidate for the process, samples can be processed for a nominal fee. We can also evaluate parts on a not-to-exceed cost basis if you have a target cost in mind.
We are always happy to speak with you. Please contact us at: